Product Description
With the G. Francis Small Beer Keg Dispenser Mini Keg System, you can keep up to 64 ounces of your favorite beverage fresh to enjoy for days to come. To use these mini beer kegs, attach the pouring mechanism, screw on a 16g CO2 cartridge, and pour out the good times. Most drinks pour best between 5-10 PSI, but certain concoctions require different pressures, which is why we include a 0-30 PSI pressure gauge to fine tune your pours. To ensure a perfect pour, the plastic cylinder flow-control block is an optional piece for flow control and reduction of foam. Install this behind the faucet inside the shank. If you wish to force carbonate your beverage, fill your keg, increase the pressure to 15 PSI or higher, and let it sit overnight. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Product Features
- HAVE YOUR FAVORITE BEVERAGES: Use the G. Francis Beer Dispenser Beer Kegs for Home Mini Keg for fermenting, kegging, storing, and dispensing up to 64 ounces (1.9 L) of homebrew beer, kombucha, cold brew coffee, seltzer water, iced tea, soda, mimosa, spritzer mixed drinks, and any other drink you desire; Microbreweries will fill the beer dispenser with your favorite brew so you can enjoy it at home or at any get together
- PERFECT SIZE: Mini keg dispenser 64-ounce (1.9 L) size is approximately 8 inches tall and 5.25 inches in diameter (20.3cm x 13.3cm) with the tap off and the stainless steel cap on; Beer keg beer machine fits in your refrigerator even with tap attached; This lightweight beer keg tap mini beer keg has a portable size that allows you to bring it to any outdoor barbeque, party, or get together
- BUILT TO LAST: Home beer tap is constructed with stainless steel components, a twist-tube spear, and copper faucet for maximum strength and longevity; Keg dispenser keeps contaminants out, carbonation in, eliminates foam, and preserves coldness longer than breakable glass growler alternatives; By keeping the keg beer dispenser clean, your brew stays delicious and fresh
- EASY TO USE: To use the keg growler, simply remove cap, screw on top tap (with foam blocker in tab) on mini beer dispenser, screw in a 16 gram CO2 cartridge (not included), turn the flow regulator to your desired PSI, pull the tap, and let the beer flow; When finished, simply turn the regulator off, leave the mini keg pressurized to preserve the beer and prevent it from going flat, and place in fridge or cooler; Not recommended for use with nitrogen; Assembly required, instructions included
- PACKAGE CONTENTS: Mini keg beer dispenser with regulator and dispenser kit comes complete with a spear body, crossbar, twist tube, pressure relief ring, nut, white flow-control block, faucet, faucet knob, regulator, regulator base, regulator knob, gauge, and beer hose; 16g CO2 capsule and CO2 cartridges not included; For best results, use beverage grade CO2 cartridges (not all CO2 cartridges are made to be suitable for beverages); Included O-rings are extras, not for initial assembly
